Your water meter is the simplest leak detector ever made — and the one most Boerne homeowners never use. Turn off every fixture, watch the meter: if the low-flow indicator creeps, water is escaping somewhere between the meter and your taps. That’s a supply leak, and it needs professional locating.
We take it from there with equipment that hears and sees what you can’t: acoustic sensors that pick up the hiss of pressurized water through slab, thermal imaging that maps the warm plume of a hot-line leak. Start the hunt at (833) 834-1087.
How leak and slab detection works
Pressure testing is the backbone of supply-leak detection: the line is isolated, pressurized with air or water, and monitored. A holding line is exonerated; a dropping line is guilty — and the test repeats on smaller segments until the failing run is identified. It’s methodical, unglamorous, and definitive.
Once the run is identified, acoustic sensors walk its path, listening for the leak’s peak intensity. On hot-water lines, the thermal camera often spots the warm plume first, and the acoustic gear confirms it. The marked location is typically accurate to a small area — which is why we can open the slab surgically instead of exploratorily.
Signs you need leak and slab detection in Boerne
Call for detection if any of these fit your Boerne home:
- Foundation soil that stays wet or shifts near the house.
- Hot water that arrives slower than it used to, hinting at a hot-line leak.
- A water bill that jumps with no explanation.
- A water bill climbing with no visible leak and no usage change.
What is included
A leak detection visit in Boerne is an investigation, and this is its full toolkit:
- Toilet, irrigation, and fixture elimination checks
- Photo documentation of all findings
- Repair plan with upfront flat-rate pricing
- Acoustic leak listening equipment survey
- Thermal imaging scans
- Pressure testing of supply lines
San Antonio Area: how local conditions shape leak and slab detection
To understand hidden leaks in Boerne, start with the San Antonio Area ground underneath it:
The mid-century and older stock adds galvanized and early-copper failures — pipe simply reaching the end of its material life. Detection in these homes is often the first step of a larger conversation, because one found leak in failing pipe usually means more are coming.
What affects the cost of leak and slab detection in Boerne
Cost factors are the leak’s location, the line’s condition, and the repair method the evidence supports. Under-slab in the middle of the house costs more to access than a wall line; a line with multiple weak points pushes toward rerouting rather than another spot fix. Each variable is visible in the findings we show you.
What never inflates the price is uncertainty — because there isn’t any by quote time. The detection visit eliminates the guessing, so the repair quote is built on a marked location and known pipe condition, locked before work begins.
Common questions
Why did my water bill double?
Either a supply leak is running constantly or a fixture like a toilet or irrigation valve is stuck open. The meter test sorts it in minutes — then we hunt the actual source.
Can a slab leak cause foundation damage?
Yes — escaping water erodes and saturates the soil supporting the slab, and that movement cracks concrete. Early detection is dramatically cheaper than foundation repair.
How accurate is the pinpointing?
With acoustic plus thermal or pressure confirmation, typically within a small area. Two independent methods agreeing is our standard before any concrete is opened.
My floor is warm in one spot — is that a slab leak?
It is the classic symptom of a hot-water line leak under the slab. Thermal imaging confirms it quickly — call before the leak undermines the soil beneath.
What causes slab leaks around San Antonio?
Clay soil movement plus hard-water pipe degradation — the two local forces working together. Pressure testing and acoustic equipment pinpoint the break precisely.
Are pinhole leaks a repiping signal?
When they multiply, yes. One pinhole is a repair; a pattern across the system means the pipe is failing everywhere and patching just funds the inevitable.
More plumbing help in Boerne
Start at our Boerne plumber hub or the Leak & Slab Detection guide. Related services in Boerne: Emergency Plumbing in Boerne, Water Heater Installation & Repair in Boerne, Drain Cleaning in Boerne, Sewer Line Services in Boerne, Whole-Home Repiping in Boerne, Gas Line Services in Boerne, Water Treatment & Filtration in Boerne. Leak & Slab Detection nearby: Leak & Slab Detection in Universal City, Leak & Slab Detection in Live Oak, Leak & Slab Detection in Converse, Leak & Slab Detection in Kerrville.
One call is all it takes in Boerne. (833) 834-1087 reaches a live dispatcher around the clock — no voicemail, no waiting until morning. Upfront pricing, local techs, and help rolling to your door across the San Antonio Area.
Other services in Boerne.
Emergency Plumbing
Emergency plumbing is immediate response to water damage in progress — burst pipes, major leaks, sewage backups, and total water loss. You reach a live dispatcher who triages the situation on the call and routes a stocked truck immediately, so the water stops as fast as possible.
Water Heater Installation & Repair
A water heater supplies hot water to every faucet, shower, and appliance in your home — tank models store it, tankless models heat it on demand. We repair failed burners, thermostats, and heating elements, and size replacements to your household’s actual hot-water demand so the showers stay hot.
Drain Cleaning
Drain cleaning removes the blockages that slow or stop wastewater flow — grease, soap, hair, scale, and root intrusion. We match the tool to the clog: drain snakes for branch lines, inspection cameras for diagnosis, and hydro jetting to scour the pipe wall on main-line stoppages.
Sewer Line Services
A sewer line carries all wastewater from your home to the city main, so a failure here backs up every drain at once. We inspect with an HD camera first, then clear root intrusion or repair damaged sections — replacing the line only when the pipe itself is truly done.
Whole-Home Repiping
Repiping replaces every water supply line in the home at once, ending the cycle of one leak after another. We install new PEX or copper pipe through minimal wall openings, pressure-test the system, and leave it up to current code.
Gas Line Services
Gas lines feed stoves, water heaters, dryers, and grills — and any work on them has to be exact. We repair damaged sections, extend lines for new appliances, and set new appliance hookups, pressure-testing every joint before the job is signed off.
Water Treatment & Filtration
Water treatment conditions your supply water so mineral hardness and contaminants stop damaging fixtures, appliances, and the water heater. We test your water first, then install whole-home softeners and filtration matched to what the test shows.
Leak & Slab Detection in these other communities:
A plumbing problem gets worse, not better.
Leaks soak through framing and flooring the longer they run. One call puts a licensed plumber on the way — day, night, weekends, holidays.
(833) 834-1087 Call-only line · Answered 24/7